acme.sh

@@ -666,15 +666,8 @@ _hex_dump() {
     xxd -ps -c 20 -i | sed "s/ 0x/ /g" | tr -d ",\n" | tr -s " "
   else
     _debug3 "using _ascii_hex"
-    #line by line: the cut -c in _ascii_hex works per line, and a $(cat)
-    #capture would drop the trailing newlines (illumos without od in PATH)
-    while IFS= read -r _hd_line; do
-      _ascii_hex "$_hd_line"
-      printf " 0a"
-    done
-    if [ -n "$_hd_line" ]; then
-      _ascii_hex "$_hd_line"
-    fi
+    str=$(cat)
+    _ascii_hex "$str"
   fi
 }
 
@@ -914,12 +907,7 @@ _json_encode() {
   _j_str="$(sed 's/"/\\"/g' | sed "s/\r/\\r/g")"
   _debug3 "_json_encode"
   _debug3 "_j_str" "$_j_str"
-  #printf, not echo: dash's echo interprets backslash escapes and would
-  #collapse the \\ sequences (e.g. Telegram MarkdownV2 escapes, issue 7212)
-  _j_hex="$(printf "%s\n" "$_j_str" | _hex_dump | _lower_case)"
-  #the hex line must end with a newline: Solaris sed drops an unterminated
-  #last line, which emptied the whole output
-  printf "%s\n" "$_j_hex" | sed 's/0a/5c 6e/g' | tr -d ' ' | _h2b | tr -d "\r\n"
+  echo "$_j_str" | _hex_dump | _lower_case | sed 's/0a/5c 6e/g' | tr -d ' ' | _h2b | tr -d "\r\n"
 }
 
 #from: http:\/\/  to http://
@@ -927,7 +915,7 @@ _json_decode() {
   _j_str="$(sed 's#\\/#/#g')"
   _debug3 "_json_decode"
   _debug3 "_j_str" "$_j_str"
-  printf "%s\n" "$_j_str"
+  echo "$_j_str"
 }
 
 #extract the authorization URLs from an order response on stdin, as a
@@ -2926,7 +2914,6 @@ _setopt() {
     _err "Cannot read $__conf."
     return 1
   fi
-  __old_text="$__text"
   #build the new content first and write it once through _write_conf:
   #redirecting straight into the conf truncates it before anything is
   #written, so a failing sed (#2426) or a failing write (#7247) left a
@@ -2943,13 +2930,6 @@ _setopt() {
     _debug3 APP
     __text="$__text${__text:+$__nl}$__opt$__sep$__val$__end"
   fi
-  if [ -z "$__sed_err" ] && [ "$__text" = "$__old_text" ]; then
-    #the value is already saved: callers re-save the same values on every
-    #run, and each write is a temp file plus a rename, which is slow on
-    #some storage (#7335)
-    _debug3 "Unchanged, skip writing $__conf"
-    return 0
-  fi
   if [ "$__sed_err" ] || ! _write_conf "$__conf" "$__text"; then
     _err "Cannot save '$__opt' to $__conf."
     return 1
@@ -2979,19 +2959,11 @@ _clear_conf() {
   _c_c_f="$1"
   _sdkey="$2"
   if [ "$_c_c_f" ]; then
-    _c_c_old="$(cat "$_c_c_f")"
+    _conf_data="$(cat "$_c_c_f")"
     #printf, not echo: dash's builtin echo interprets backslash escapes and
     #would corrupt saved values that contain them on every rewrite
-    if ! _conf_data="$(printf -- "%s\n" "$_c_c_old" | sed "/^$_sdkey *=.*$/d")"; then
-      _err "Cannot clear '$_sdkey' in $_c_c_f."
-      return 1
-    fi
-    #the key is not there, the usual case for the legacy keys cleared on
-    #every _savedeployconf: nothing to write (#7335)
-    if [ "$_conf_data" = "$_c_c_old" ]; then
-      return 0
-    fi
-    if ! _write_conf "$_c_c_f" "$_conf_data"; then
+    if ! _conf_data="$(printf -- "%s\n" "$_conf_data" | sed "/^$_sdkey *=.*$/d")" ||
+      ! _write_conf "$_c_c_f" "$_conf_data"; then
       _err "Cannot clear '$_sdkey' in $_c_c_f."
       return 1
     fi

deploy/hp_ews.sh

@@ -1,207 +0,0 @@
-#!/usr/bin/env sh
-
-# Here is a script to deploy cert to an HP printer's Embedded Web Server (EWS).
-#
-# Docs: https://github.com/acmesh-official/acme.sh/wiki/deployhooks#47-deploy-the-certificate-to-an-hp-printer-ews
-#
-# Tested on an HP Color LaserJet Pro MFP M479fdw, firmware
-# CLRWTRXXXN002.2539E.00. It should work on any modern HP printer whose EWS
-# exposes the "Install Certificate" flow at
-# /Security/DeviceCertificates/NewCertWithPassword/Upload -- that endpoint
-# takes a password-protected PKCS#12 bundle, which this hook builds from the
-# issued certificate, its key and the CA chain.
-#
-# ```sh
-# export HP_EWS_PASSWORD=mysecret
-# export HP_EWS_INSECURE=1          # needed until the printer serves a trusted cert
-# acme.sh --deploy -d printer.example.com --deploy-hook hp_ews
-# ```
-#
-# Environment variables:
-#   HP_EWS_PASSWORD      (required)  EWS administrator password.
-#   HP_EWS_HOST          (optional)  IP or hostname of the printer.
-#                                    Default: the certificate's domain.
-#   HP_EWS_USERNAME      (optional)  EWS administrator user. Default: admin
-#   HP_EWS_PFX_PASSWORD  (optional)  Password for the generated PKCS#12
-#                                    bundle. A random one is used per run if
-#                                    unset; set it only if you want the
-#                                    bundle to be reproducible.
-#   HP_EWS_INSECURE      (optional)  Set to a non-empty value to skip TLS
-#                                    verification when talking to the
-#                                    printer. Needed on the first deploy,
-#                                    because the printer still serves its
-#                                    self-signed certificate at that point.
-#                                    acme.sh's global HTTPS_INSECURE is
-#                                    honoured as well.
-#
-# The hook authenticates with HTTP Basic auth. Printers whose EWS only offers
-# Digest auth are not supported.
-#
-# Requires openssl, to build the PKCS#12 bundle.
-#
-# returns 0 means success, otherwise error.
-
-########  Public functions #####################
-
-#domain keyfile certfile cafile fullchain pfx
-hp_ews_deploy() {
-  _cdomain="$1"
-  _ckey="$2"
-  _ccert="$3"
-  _cca="$4"
-  _cfullchain="$5"
-  _cpfx="$6"
-
-  _debug _cdomain "$_cdomain"
-  _debug _ckey "$_ckey"
-  _debug _ccert "$_ccert"
-  _debug _cca "$_cca"
-  _debug _cfullchain "$_cfullchain"
-  _debug _cpfx "$_cpfx"
-
-  _getdeployconf HP_EWS_HOST
-  _getdeployconf HP_EWS_USERNAME
-  _getdeployconf HP_EWS_PASSWORD
-  _getdeployconf HP_EWS_PFX_PASSWORD
-  _getdeployconf HP_EWS_INSECURE
-
-  HP_EWS_HOST="${HP_EWS_HOST:-$_cdomain}"
-  HP_EWS_USERNAME="${HP_EWS_USERNAME:-admin}"
-
-  _debug HP_EWS_HOST "$HP_EWS_HOST"
-  _debug HP_EWS_USERNAME "$HP_EWS_USERNAME"
-  _secure_debug HP_EWS_PASSWORD "$HP_EWS_PASSWORD"
-  _secure_debug HP_EWS_PFX_PASSWORD "$HP_EWS_PFX_PASSWORD"
-  _debug HP_EWS_INSECURE "$HP_EWS_INSECURE"
-
-  if [ -z "$HP_EWS_PASSWORD" ]; then
-    _err "HP_EWS_PASSWORD is required. Please set the password of the printer's EWS administrator account."
-    return 1
-  fi
-
-  _savedeployconf HP_EWS_HOST "$HP_EWS_HOST"
-  _savedeployconf HP_EWS_USERNAME "$HP_EWS_USERNAME"
-  _savedeployconf HP_EWS_PASSWORD "$HP_EWS_PASSWORD" "base64"
-  _savedeployconf HP_EWS_PFX_PASSWORD "$HP_EWS_PFX_PASSWORD" "base64"
-  _savedeployconf HP_EWS_INSECURE "$HP_EWS_INSECURE"
-
-  if ! _exists "${ACME_OPENSSL_BIN:-openssl}"; then
-    _err "openssl is required by this deploy hook, but was not found."
-    return 1
-  fi
-
-  # The bundle password only has to survive the single upload below, so a
-  # fresh random one is used unless the operator asked for a fixed value.
-  _HP_EWS_PFXPW="$HP_EWS_PFX_PASSWORD"
-  if [ -z "$_HP_EWS_PFXPW" ]; then
-    _HP_EWS_PFXPW="$(${ACME_OPENSSL_BIN:-openssl} rand -hex 24)"
-    if [ -z "$_HP_EWS_PFXPW" ]; then
-      _err "Could not generate a random password for the PKCS#12 bundle."
-      return 1
-    fi
-  fi
-  export _HP_EWS_PFXPW
-
-  # $6 is only materialised when Le_PFXPassword is set for this domain, and
-  # it would be built without the CA chain, so build our own bundle instead.
-  _hp_ews_pfx="$(_mktemp)"
-  _hp_ews_body="$(_mktemp)"
-  if [ -z "$_hp_ews_pfx" ] || [ -z "$_hp_ews_body" ]; then
-    _err "Could not create the temporary files needed for the upload."
-    _hp_ews_cleanup
-    return 1
-  fi
-
-  _hp_ews_ret=0
-  if ! _hp_ews_make_pfx; then
-    _hp_ews_ret=1
-  elif ! _hp_ews_upload; then
-    _hp_ews_ret=1
-  fi
-
-  _hp_ews_cleanup
-
-  return "$_hp_ews_ret"
-}
-
-####################  Private functions below ##################################
-
-_hp_ews_cleanup() {
-  [ -n "$_hp_ews_pfx" ] && rm -f "$_hp_ews_pfx"
-  [ -n "$_hp_ews_body" ] && rm -f "$_hp_ews_body"
-  unset _HP_EWS_PFXPW
-  # Do not leak the request header into any hook that runs after this one.
-  export _H1=""
-  return 0
-}
-
-# Bundle key, certificate and chain into $_hp_ews_pfx, protected by
-# $_HP_EWS_PFXPW. The password goes through the environment rather than the
-# command line so that it does not show up in ps output.
-_hp_ews_make_pfx() {
-  _info "Building the PKCS#12 bundle"
-
-  if ! ${ACME_OPENSSL_BIN:-openssl} pkcs12 -export \
-    -out "$_hp_ews_pfx" \
-    -inkey "$_ckey" \
-    -in "$_ccert" \
-    -certfile "$_cca" \
-    -passout env:_HP_EWS_PFXPW; then
-    _err "Failed to build the PKCS#12 bundle."
-    return 1
-  fi
-
-  if [ ! -s "$_hp_ews_pfx" ]; then
-    _err "The PKCS#12 bundle is empty."
-    return 1
-  fi
-
-  return 0
-}
-
-# Build the multipart body in $_hp_ews_body and POST it to the printer.
-_hp_ews_upload() {
-  _hp_ews_url="https://${HP_EWS_HOST}/Security/DeviceCertificates/NewCertWithPassword/Upload"
-  _hp_ews_boundary="----------------------------acmesh$(${ACME_OPENSSL_BIN:-openssl} rand -hex 16)"
-
-  {
-    printf -- "--%s\r\n" "$_hp_ews_boundary"
-    printf "Content-Disposition: form-data; name=\"certificate\"; filename=\"%s.pfx\"\r\n" "$_cdomain"
-    printf "Content-Type: application/x-pkcs12\r\n\r\n"
-    cat "$_hp_ews_pfx"
-    printf "\r\n"
-    printf -- "--%s\r\n" "$_hp_ews_boundary"
-    printf "Content-Disposition: form-data; name=\"password\"\r\n\r\n%s\r\n" "$_HP_EWS_PFXPW"
-    printf -- "--%s--\r\n" "$_hp_ews_boundary"
-  } >"$_hp_ews_body"
-
-  _H1="Authorization: Basic $(printf "%s:%s" "$HP_EWS_USERNAME" "$HP_EWS_PASSWORD" | _base64)"
-  export _H1
-  if [ "$HP_EWS_INSECURE" ]; then
-    export HTTPS_INSECURE=1
-  fi
-
-  _info "Uploading the certificate to $_hp_ews_url"
-  if ! _post_file "$_hp_ews_body" "$_hp_ews_url" "" "POST" "multipart/form-data; boundary=$_hp_ews_boundary" >/dev/null; then
-    if [ -z "$HTTPS_INSECURE" ]; then
-      _err "If the printer still serves its self-signed certificate, set HP_EWS_INSECURE=1 and try again."
-    fi
-    return 1
-  fi
-
-  # The EWS answers 201 Created on a successful install.
-  _hp_ews_code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
-  _debug _hp_ews_code "$_hp_ews_code"
-
-  if [ "$_hp_ews_code" != "201" ] && [ "$_hp_ews_code" != "200" ]; then
-    _err "The printer rejected the certificate (HTTP $_hp_ews_code)."
-    if [ "$_hp_ews_code" = "401" ] || [ "$_hp_ews_code" = "403" ]; then
-      _err "Check HP_EWS_USERNAME and HP_EWS_PASSWORD. Only HTTP Basic authentication is"
-      _err "supported; printers that only offer Digest cannot be used with this hook."
-    fi
-    return 1
-  fi
-
-  _info "Certificate installed (HTTP $_hp_ews_code). The printer restarts its web server shortly."
-  return 0
-}

dnsapi/dns_dnsimple.sh

@@ -15,7 +15,7 @@ DNSimple_API="https://api.dnsimple.com/v2"
 
 # Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
 dns_dnsimple_add() {
-  fulldomain=$(echo "$1" | _lower_case)
+  fulldomain=$1
   txtvalue=$2
 
   DNSimple_OAUTH_TOKEN="${DNSimple_OAUTH_TOKEN:-$(_readaccountconf_mutable DNSimple_OAUTH_TOKEN)}"
@@ -56,7 +56,7 @@ dns_dnsimple_add() {
 
 # fulldomain
 dns_dnsimple_rm() {
-  fulldomain=$(echo "$1" | _lower_case)
+  fulldomain=$1
 
   DNSimple_OAUTH_TOKEN="${DNSimple_OAUTH_TOKEN:-$(_readaccountconf_mutable DNSimple_OAUTH_TOKEN)}"
   if [ -z "$DNSimple_OAUTH_TOKEN" ]; then
@@ -110,13 +110,9 @@ _get_root() {
       return 1
     fi
 
-    if ! _contains "$response" "\"name\":\"$h\""; then
-      if ! _dnsimple_rest GET "$_account_id/zones/$h/records?per_page=1"; then
-        return 1
-      fi
-    fi
-
-    if _contains "$response" "\"name\":\"$h\"" || _contains "$response" '"pagination":'; then
+    if _contains "$response" 'not found'; then
+      _debug "$h not found"
+    else
       _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$previous")
       _domain="$h"
 
@@ -125,7 +121,6 @@ _get_root() {
 
       return 0
     fi
-    _debug "$h not found"
 
     previous="$i"
     i=$(_math "$i" + 1)

dnsapi/dns_gandi_livedns.sh

@@ -59,13 +59,6 @@ dns_gandi_livedns_rm() {
   fulldomain=$1
   txtvalue=$2
 
-  GANDI_LIVEDNS_KEY="${GANDI_LIVEDNS_KEY:-$(_readaccountconf_mutable GANDI_LIVEDNS_KEY)}"
-  GANDI_LIVEDNS_TOKEN="${GANDI_LIVEDNS_TOKEN:-$(_readaccountconf_mutable GANDI_LIVEDNS_TOKEN)}"
-  if [ -z "$GANDI_LIVEDNS_KEY" ] && [ -z "$GANDI_LIVEDNS_TOKEN" ]; then
-    _err "No Token or API key (deprecated) specified for Gandi LiveDNS."
-    return 1
-  fi
-
   _debug "First detect the root zone"
   if ! _get_root "$fulldomain"; then
     _err "invalid domain"
@@ -87,20 +80,6 @@ dns_gandi_livedns_rm() {
   _new_rrset_values=$(echo "$_new_rrset_values" | sed "s/\[ *,/\[/g")
   _debug "New rrset_values" "$_new_rrset_values"
 
-  # Last value removed: delete the record instead of leaving an empty TXT rrset.
-  if [ "$(echo "$_new_rrset_values" | tr -d ' ')" = "[]" ]; then
-    if ! _gandi_livedns_rest DELETE "domains/$_domain/records/$_sub_domain/TXT"; then
-      return 1
-    fi
-    _gandi_livedns_code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")"
-    if [ "$_gandi_livedns_code" != "204" ]; then
-      _err "Error deleting record: $response"
-      return 1
-    fi
-    _info "Removing record $(__green "success")"
-    return 0
-  fi
-
   _gandi_livedns_rest PUT \
     "domains/$_domain/records/$_sub_domain/TXT" \
     "{\"rrset_ttl\": 300, \"rrset_values\": $_new_rrset_values}" &&

dnsapi/dns_namecheap.sh

@@ -185,14 +185,13 @@ _get_root_by_getHosts() {
 }
 
 _namecheap_set_publicip() {
-  NAMECHEAP_SOURCEIP="${NAMECHEAP_SOURCEIP:-$(_readaccountconf_mutable NAMECHEAP_SOURCEIP)}"
 
   if [ -z "$NAMECHEAP_SOURCEIP" ]; then
     _err "No Source IP specified for Namecheap API."
     _err "Use your public ip address or an url to retrieve it (e.g. https://ifconfig.co/ip) and export it as NAMECHEAP_SOURCEIP"
     return 1
   else
-    _saveaccountconf_mutable NAMECHEAP_SOURCEIP "$NAMECHEAP_SOURCEIP"
+    _saveaccountconf NAMECHEAP_SOURCEIP "$NAMECHEAP_SOURCEIP"
     _debug sourceip "$NAMECHEAP_SOURCEIP"
 
     ip=$(echo "$NAMECHEAP_SOURCEIP" | _egrep_o '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
@@ -253,8 +252,6 @@ _namecheap_parse_host() {
 }
 
 _namecheap_check_config() {
-  NAMECHEAP_API_KEY="${NAMECHEAP_API_KEY:-$(_readaccountconf_mutable NAMECHEAP_API_KEY)}"
-  NAMECHEAP_USERNAME="${NAMECHEAP_USERNAME:-$(_readaccountconf_mutable NAMECHEAP_USERNAME)}"
 
   if [ -z "$NAMECHEAP_API_KEY" ]; then
     _err "No API key specified for Namecheap API."
@@ -268,8 +265,8 @@ _namecheap_check_config() {
     return 1
   fi
 
-  _saveaccountconf_mutable NAMECHEAP_API_KEY "$NAMECHEAP_API_KEY"
-  _saveaccountconf_mutable NAMECHEAP_USERNAME "$NAMECHEAP_USERNAME"
+  _saveaccountconf NAMECHEAP_API_KEY "$NAMECHEAP_API_KEY"
+  _saveaccountconf NAMECHEAP_USERNAME "$NAMECHEAP_USERNAME"
 
   return 0
 }

dnsapi/dns_primedns.sh

@@ -1,154 +0,0 @@
-#!/usr/bin/env sh
-# shellcheck disable=SC2034
-dns_primedns_info='PrimeDNS
-Site: primedns.net
-Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_primedns
-Options:
- PRIMEDNS_API_KEY API Key. Scope acme:name:_acme-challenge.<hostname> for each name you issue (or dns:write)
-OptionsAlt:
- PRIMEDNS_API_URL API base URL. Optional, default https://api.primedns.net/v1
-Issues: github.com/acmesh-official/acme.sh/issues/7330
-Author: PrimeDNS <acme@primedns.net>
-'
-
-PRIMEDNS_Api_Default="https://api.primedns.net/v1"
-
-########  Public functions #####################
-
-#Usage: dns_primedns_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
-dns_primedns_add() {
-  fulldomain=$(_idn "$1")
-  txtvalue=$2
-
-  PRIMEDNS_API_KEY="${PRIMEDNS_API_KEY:-$(_readaccountconf_mutable PRIMEDNS_API_KEY)}"
-  if [ -z "$PRIMEDNS_API_KEY" ]; then
-    PRIMEDNS_API_KEY=""
-    _err "You didn't specify a PrimeDNS API key (PRIMEDNS_API_KEY) yet."
-    _err "Create one in the PrimeDNS panel (Account -> API Keys) with the scope acme:name:_acme-challenge.<hostname> for each name you issue."
-    return 1
-  fi
-
-  PRIMEDNS_API_URL="${PRIMEDNS_API_URL:-$(_readaccountconf_mutable PRIMEDNS_API_URL)}"
-
-  #save the credentials to the account conf file.
-  _saveaccountconf_mutable PRIMEDNS_API_KEY "$PRIMEDNS_API_KEY"
-  if [ "$PRIMEDNS_API_URL" ]; then
-    _saveaccountconf_mutable PRIMEDNS_API_URL "$PRIMEDNS_API_URL"
-  fi
-
-  _info "Using PrimeDNS"
-  _debug fulldomain "$fulldomain"
-  _debug txtvalue "$txtvalue"
-
-  if ! _primedns_rest POST "$fulldomain" "$txtvalue"; then
-    return 1
-  fi
-  _info "Added, OK"
-  return 0
-}
-
-#Usage: dns_primedns_rm   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
-dns_primedns_rm() {
-  fulldomain=$(_idn "$1")
-  txtvalue=$2
-
-  PRIMEDNS_API_KEY="${PRIMEDNS_API_KEY:-$(_readaccountconf_mutable PRIMEDNS_API_KEY)}"
-  if [ -z "$PRIMEDNS_API_KEY" ]; then
-    PRIMEDNS_API_KEY=""
-    _err "You didn't specify a PrimeDNS API key (PRIMEDNS_API_KEY) yet."
-    return 1
-  fi
-  PRIMEDNS_API_URL="${PRIMEDNS_API_URL:-$(_readaccountconf_mutable PRIMEDNS_API_URL)}"
-
-  _info "Using PrimeDNS"
-  _debug fulldomain "$fulldomain"
-  _debug txtvalue "$txtvalue"
-
-  if ! _primedns_rest DELETE "$fulldomain" "$txtvalue"; then
-    return 1
-  fi
-  _info "Removed, OK"
-  return 0
-}
-
-####################  Private functions below ##################################
-
-#Usage: _primedns_rest  POST|DELETE  _acme-challenge.www.domain.com  txtvalue
-#The API creates/removes the TXT record with exactly the name given, so the full
-#name acme.sh passes (_acme-challenge.<domain>, or the name of a DNS alias) is
-#sent as it is.
-_primedns_rest() {
-  _method=$1
-  _name=$2
-  _value=$3
-  _url="${PRIMEDNS_API_URL:-$PRIMEDNS_Api_Default}/dns/acme-challenge"
-
-  #The body is built by hand, so refuse anything that would need JSON escaping.
-  case "$_name$_value" in
-  *\"* | *\\*)
-    _err "Refusing to send '$_name': it contains a quote or a backslash."
-    return 1
-    ;;
-  esac
-  if [ -z "$_name" ] || _is_idn "$_name"; then
-    _err "Cannot send '$_name': it is not a plain ASCII host name. For an IDN name install idn (acme.sh converts it to punycode) or pass the punycode name."
-    return 1
-  fi
-  _body="{\"name\":\"$_name\",\"value\":\"$_value\"}"
-  _debug _body "$_body"
-
-  _primedns_retried=""
-  while true; do
-    #acme.sh sends _H1.._H5 with every later request of this process, so the API key
-    #header must not stay set once this call is done (it would reach other hosts).
-    _primedns_old_h1="$_H1"
-    export _H1="X-API-Key: $PRIMEDNS_API_KEY"
-    : >"$HTTP_HEADER"
-    response="$(_post "$_body" "$_url" "" "$_method" "application/json")"
-    _ret=$?
-    export _H1="$_primedns_old_h1"
-    _status=$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d '\r\n')
-    if [ "$_ret" != "0" ]; then
-      _err "Error calling the PrimeDNS API ($_method /dns/acme-challenge)."
-      return 1
-    fi
-    response="$(echo "$response" | _normalizeJson)"
-    _debug response "$response"
-    _debug _status "$_status"
-
-    #Rate limited or temporary server error: wait and try once more.
-    if [ -z "$_primedns_retried" ] && { [ "$_status" = "429" ] || [ "$_status" = "502" ] || [ "$_status" = "503" ] || [ "$_status" = "504" ]; }; then
-      _wait="$(_retryafter_seconds <"$HTTP_HEADER")"
-      case "$_wait" in
-      '' | *[!0-9]*) _wait=5 ;;
-      esac
-      [ "$_wait" -gt 60 ] && _wait=60
-      _info "PrimeDNS API answered HTTP $_status, retrying in $_wait seconds."
-      _sleep "$_wait"
-      _primedns_retried=1
-      continue
-    fi
-    break
-  done
-
-  if _contains "$response" '"success":true'; then
-    return 0
-  fi
-
-  if [ "$_status" = "401" ]; then
-    _err "The PrimeDNS API refused the key (HTTP 401): it is wrong, revoked or expired. Check PRIMEDNS_API_KEY."
-  elif _contains "$response" 'IP_NOT_ALLOWED'; then
-    _err "This PrimeDNS API key may not be used from this address (allowed_ips). Add the address to the key or run acme.sh from an allowed host."
-  elif _contains "$response" 'NAME_NOT_ALLOWED'; then
-    _err "This PrimeDNS API key may not write $_name: add the scope acme:name:$_name to the key, or the zone to its allowed zones."
-  elif _contains "$response" 'INSUFFICIENT_SCOPE'; then
-    _err "This PrimeDNS API key needs the scope acme:name:$_name (or dns:write)."
-  elif _contains "$response" 'DOMAIN_NOT_FOUND'; then
-    _err "$_name is not in a zone of the PrimeDNS account that owns this API key."
-  elif [ "$_status" = "429" ]; then
-    _err "PrimeDNS API rate limit still hit after a retry. Try again in a minute."
-  else
-    _err "PrimeDNS API error (HTTP $_status): $response"
-  fi
-  return 1
-}

dnsapi/dns_yc.sh

@@ -106,16 +106,13 @@ dns_yc_add() {
   _debug _domain "$_domain"
 
   _debug "Getting txt records"
-  if ! _yc_rest GET "zones/${_domain_id}:getRecordSet?type=TXT&name=$fulldomain"; then
+  if ! _yc_rest GET "zones/${_domain_id}:getRecordSet?type=TXT&name=$_sub_domain"; then
     _err "Error: $response"
     return 1
   fi
 
   _info "Adding record"
-  # The absolute name (trailing dot) also covers a record at the zone apex,
-  # e.g. with --domain-alias, which has no relative form: an empty name is
-  # rejected by the API.
-  if _yc_rest POST "zones/$_domain_id:upsertRecordSets" "{\"merges\": [ { \"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":\"120\",\"data\":[\"$txtvalue\"]}]}"; then
+  if _yc_rest POST "zones/$_domain_id:upsertRecordSets" "{\"merges\": [ { \"name\":\"$_sub_domain\",\"type\":\"TXT\",\"ttl\":\"120\",\"data\":[\"$txtvalue\"]}]}"; then
     if _contains "$response" "\"done\": *true"; then
       _info "Added, OK"
       return 0
@@ -170,7 +167,7 @@ dns_yc_rm() {
   # upsertRecordSets.deletions removes only the given value from the rrset,
   # leaving any other values at the same name (e.g. base + wildcard domain)
   # intact -- no need to read the current data set and recompute it.
-  if _yc_rest POST "zones/$_domain_id:upsertRecordSets" "{\"deletions\": [ { \"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":\"120\",\"data\":[\"$txtvalue\"]}]}"; then
+  if _yc_rest POST "zones/$_domain_id:upsertRecordSets" "{\"deletions\": [ { \"name\":\"$_sub_domain\",\"type\":\"TXT\",\"ttl\":\"120\",\"data\":[\"$txtvalue\"]}]}"; then
     if _contains "$response" "\"done\": *true"; then
       _info "Delete, OK"
       return 0